Parameter of T series Die Casting Machine

Specification Unit JD200-T
Die closing Die-locking force KN 2000
Platen dimensions(VXH) mm 740×740
Space between tie bars mm 510×510
Tie bar diameter mm 100
Die thickness mm 600-200
Die stroke mm 400
Injection Maximum injection force KN 280
Intensification ratio 01:02.2
Injection stroke mm 400
Casting flange diameter mm 110
Casting flange protrusion mm 10
Tip protrusion mm 165
Injection port position(downward from machine center) mm 0/140
Injection speed m/s 7
Tip diameter mm 50/60/70
Sleeve length mm 260
Ejection Ejector force KN 113
Ejector stroke mm 115
Hydraulic Operating pressure Mpa 15
Required hydraulic oil volume kg 400
Numverof movable cores ports 1
Core pulling interface size Rc 1/2
Electrical Power supply V 380
For lubrication pump V 220
Pump motor capacity KW 15
Other Machine weight ton 8.6
Machine dimensions(LxWxH) m 5.5X1.5X2.6
Specification Unit JD300-T
Die closing Die-locking force KN 3000
Platen dimensions(VXH) mm 850×850
Space between tie bars mm 580×580
Tie bar diameter mm 120
Die thickness mm 650-250
Die stroke mm 460
Injection Maximum injection force KN 350
Intensification ratio 1:2.38
Injection stroke mm 480
Casting flange diameter mm 110
Casting flange protrusion mm 10
Tip protrusion mm 218
Injection port position(downward from machine center) mm 0/140
Injection speed m/s 7
Tip diameter mm 50/60/70
Sleeve length mm 290
Ejection Ejector force KN 156
Ejector stroke mm 120
Hydraulic Operating pressure Mpa 15
Required hydraulic oil volume kg 510
Numverof movable cores ports 2
Core pulling interface size Rc 3/4
Electrical Power supply V 380
For lubrication pump V 220
Pump motor capacity KW 18.5
Other Machine weight ton 11.2
Machine dimensions(LxWxH) m 5.9X1.6X2.7
Specification Unit JD420-T?
Die closing Die-locking force KN 4200
Platen dimensions(VXH) mm 935×935
Space between tie bars mm 650×650
Tie bar diameter mm 135
Die thickness mm 700-300
Die stroke mm 550
Injection Maximum injection force KN 450
Intensification ratio 1:2.56
Injection stroke mm 500
Casting flange diameter mm 110
Casting flange protrusion mm 10
Tip protrusion mm 200
Injection port position(downward from machine center) mm 0/175
Injection speed m/s 7
Tip diameter mm 60/70/80
Sleeve length mm 332
Ejection Ejector force KN 189
Ejector stroke mm 125
Hydraulic Operating pressure Mpa 15
Required hydraulic oil volume kg 600
Numverof movable cores ports 2
Core pulling interface size Rc 3/4
Electrical Power supply V 380
For lubrication pump V 220
Pump motor capacity KW 22
Other Machine weight ton 15.5
Machine dimensions(LxWxH) m 6.2X1.8X2.9
Specification Unit JD500-T
Die closing Die-locking force KN 5000
Platen dimensions(VXH) mm 1100×1100
Space between tie bars mm 760×760
Tie bar diameter mm 150
Die thickness mm 850-350
Die stroke mm 580
Injection Maximum injection force KN 520
Intensification ratio 1:2.77
Injection stroke mm 600
Casting flange diameter mm 165
Casting flange protrusion mm 15
Tip protrusion mm 270
Injection port position(downward from machine center) mm 0/220
Injection speed m/s 7
Tip diameter mm 70/80/90
Sleeve length mm 365
Ejection Ejector force KN 250
Ejector stroke mm 150
Hydraulic Operating pressure Mpa 15
Required hydraulic oil volume kg 680
Numverof movable cores ports 2
Core pulling interface size Rc 3/4
Electrical Power supply V 380
For lubrication pump V 220
Pump motor capacity KW 30
Other Machine weight ton 25.3
Machine dimensions(LxWxH) m 7.2X1.9X3.1
Specification Unit JD650-T
Die closing Die-locking force KN 6500
Platen dimensions(VXH) mm 1210×1210
Space between tie bars mm 850×850
Tie bar diameter mm 170
Die thickness mm 900-350
Die stroke mm 670
Injection Maximum injection force KN 560
Intensification ratio 1:2.52
Injection stroke mm 670
Casting flange diameter mm 165
Casting flange protrusion mm 15
Tip protrusion mm 300
Injection port position(downward from machine center) mm 0/250
Injection speed m/s 7
Tip diameter mm 70/80/90
Sleeve length mm 405
Ejection Ejector force KN 300
Ejector stroke mm 180
Hydraulic Operating pressure Mpa 15
Required hydraulic oil volume kg 850
Numverof movable cores ports 4
Core pulling interface size Rc 1
Electrical Power supply V 380
For lubrication pump V 220
Pump motor capacity KW 37
Other Machine weight ton 30.5
Machine dimensions(LxWxH) m 7.8X2.1X3.5
Specification Unit JD800-T
Die closing Die-locking force KN 8000
Platen dimensions(VXH) mm 1400×1400
Space between tie bars mm 930×930
Tie bar diameter mm 190
Die thickness mm 950-400
Die stroke mm 760
Injection Maximum injection force KN 640
Intensification ratio 1:2.56
Injection stroke mm 760
Casting flange diameter mm 200
Casting flange protrusion mm 20
Tip protrusion mm 365
Injection port position(downward from machine center) mm 0/250
Injection speed m/s 7
Tip diameter mm 80/90/100
Sleeve length mm 445
Ejection Ejector force KN 370
Ejector stroke mm 205
Hydraulic Operating pressure Mpa 15
Required hydraulic oil volume kg 1020
Numverof movable cores ports 4
Core pulling interface size Rc 1
Electrical Power supply V 380
For lubrication pump V 220
Pump motor capacity KW 45
Other Machine weight ton 40.5
Machine dimensions(LxWxH) m 8.6X2.5X3.7

CONTACT US

Jinqiao Town, Luqiao District, Taizhou City, Zhejiang Province